D-Link AC3200 Ultra User Manual page 106

Section 4 - Configuration - Access Point Mode
Select Dynamic IP (DHCP) to obtain IP address information automatically from your Uplink
Router.
AP Mode
Device Mode:
Dynamic IP (DHCP)
My Internet
Connection Is:
Advanced Settings
Host Name: The host name is optional.
Primary DNS Enter the primary DNS server IP address assigned by your ISP. This
Server:
address is usually obtained automatically from your ISP.
Secondary DNS
Enter the secondary DNS server IP address assigned by your ISP. This
Server: address is usually obtained automatically from your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Click Save when you are done.
D-Link DIR-890L User Manual
Dynamic IP (DHCP)
Home
DIR-890L HW:A1 FW:1.10
Internet
Use this section to configure your Internet Connection type.
Settings >> Internet
Device Mode: AP Mode
My Internet Connection is: Dynamic IP (DHCP)
Host Name: dlinkrouter
Primary DNS Server:
Secondary DNS Server:
MTU: Auto
COPYRIGHT © 2016 D-Link
Settings Management
Save
⌵
⌵
Advanced Settings ...
⌵
101