D-Link AC3200 Ultra User Manual page 65

Section 4 - Configuration - Router Mode
Advanced Settings - Address Autoconfiguration Settings
Enable Automatic Enable or disable the Automatic IPv6 Address Assignment feature.
IPv6 Address
Assignment:
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.
Autoconfiguration
Type:
If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router Enter the router address advertisement lifetime (in minutes).
Advertisement
Lifetime:
If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address Enter the starting IPv6 address for the DHCP server's IPv6 assignment.
Range (Start):
IPv6 Address
Enter the ending IPv6 address for the DHCP server's IPv6 assignment.
Range (End):
IPv6 Enter the IPv6 address lifetime (in minutes).
Advertisement
Lifetime:
Click Save when you are done.
D-Link DIR-890L User Manual
6to4 (continued)
ADDRESS AUTOCONFIGURATION SETTINGS
Enabled
Enable Automatic IPv6 Address Assignment:
Autoconfiguration Type: SLAAC+Stateless DHCP
IPv6 Advertisement Lifetime: minutes
ADDRESS AUTOCONFIGURATION SETTINGS
Enable Automatic IPv6 Address Assignment: Enabled
Autoconfiguration Type: SLAAC+RDNSS
IPv6 Advertisement Lifetime: minutes
ADDRESS AUTOCONFIGURATION SETTINGS
Enable Automatic IPv6 Address Assignment: Enabled
Autoconfiguration Type: Stateful DHCPv6
IPv6 Address Range (Start): xxxx ::00 3
IPv6 Address Range (End): xxxx ::00 16
Router Advertisement Lifetime: minutes
⌵
⌵
⌵
60