Introduction - Siemens RF182C Operating Instructions Manual

Introduction

1.1 Introduction
Purpose of these operating instructions
The information provided in these Operating Instructions enables you to operate the RF182C
communication module on a standard PC or a PLC.
Basic knowledge required
These operating instructions assume general knowledge of automation engineering and
identification systems.
You also require basic knowledge of socket programming (TCP/IP communication via
Ethernet) Socket programming depends on the programming language or the operating
system used (Windows, Linux, or Unix).
Scope of this manual
The Operating Instructions apply to the RF182C communication module.
Position in the information landscape
● The manual of the relevant RFID family contains information on the readers/SLGs to be
● Special information on parameterizing the RF620R/RF630R readers in conjunction with
Guide
These Operating Instructions describe the hardware and the communications interface of the
RF182C communication module. They comprise introductory sections and reference
sections (e.g. technical data).
The operating instructions include the following subject areas:
● Connection of the RF182C communication module
● Parameterization and programming of the RF182C communication module
● Diagnostics information
● Display elements of the RF182C communication module
● Information on repair and maintenance (e.g. firmware update)
● Technical data as well as dimension drawings of the RF182C communication module
● Ordering data
RF182C communication module
Operating Instructions, 10/2010
connected.
the RF182C communication module can be found in the "RF620R/RF630R
parameterization manual".
1
5