Siemens RF182C Operating Instructions Manual page 102

Technical data
Ambient temperature
During operation
Transport and storage
Dimensions (W x H x D) in mm
Base unit only
Base unit with connection block M12,
7/8''
Base unit with push-pull connection
block
Weight
Base unit
Connection block M12, 7/8''
Push-pull connection block
Mechanical Environmental Conditions
Mounting position
Vibration during operation
Shock resistance, shock during
operation
Degree of protection
MTBF (Mean Time Between Failures) in years
Base unit
Connection block
Approvals
1)
2)
3)
102
All supply and signal voltages must be safety extra low voltage (SELV/PELV according to
EN 60950)
24 V DC supply: Safety (electrical) isolation of low voltage (SELV / PELV acc. to EN 60950)
The power supply must provide the current required (max. 500 mA) during brief power failures of ≤
20 ms.
A cable cross-section of 2.5 mm² is mandatory for an amperage > 8 A.
0 to +60 °C
–40 to +70 °C
60 x 210 x 30
60 x 210 x 54
60 x 216 x 100
Approx. 210 g
Approx. 230 g
Approx. 120 g
All mounting positions are possible
According to IEC 61131-2:
0.75 mm (10Hz to 58 Hz)
10 g (58 Hz to 150 Hz)
Acc. to IEC 61131-2:
30 g
IP67
121
1100
cULus (file E116536)
FCC Code of Federal Regulations,
CFR 47, Part 15,
Sections 15.107 and 15.109 (Class A)
RF182C communication module
Operating Instructions, 10/2010