Addressing Of The Rfid Tags - Siemens RF182C Operating Instructions Manual

Addressing of the RFID tags

Address space of the MDS versions for MOBY U
Table B- 1
Memory
memory
32 KB
data
memory
Address space of the MDS versions for MOBY D
For address space of the RF300 transponders, see MOBY D System Manual
(http://support.automation.siemens.com/WW/view/en/13628689/0/en), section "Mobile data
storage units > Introduction".
Address space of the transponder versions for RF300
For address space of the RF300 transponders, see SIMATIC RF300 System Manual
(http://support.automation.siemens.com/WW/view/en/21738946/0/en), section "RF300
transponders > Memory configuration of the RF300 tags" and section "ISO transponders >
Memory configuration of the ISO tags".
RF182C communication module
Operating Instructions, 10/2010
Address space MOBY U
Addressing
2 KB Start address
data
End address
Memory size
Read OTP memory
(write access only possible once. The OTP memory of MOBY U can only be processed
completely, i.e. the start address must always be specified with value FFF0 hex and the
length with value 10 hex.)
Start address
Length
ID No.: (4 fixed-coded bytes; can only be read with the MDS status command)
Start address
End address
Memory size
Read OTP memory (write access only possible once)*
Start address
Length
ID No.: (4 fixed-coded bytes; can only be read with the MDS status command)
16-bit hexadecimal number
0000
07FF
08 00
FFF0
10
0000
7FFF
80 00
FFF0
10
B
Integer number
+0
+2047
2048
-16
+16
+0
+32767
32768
-16
+16
123