Heartbeat - Siemens RF182C Operating Instructions Manual

6.4.7

heartbeat

The heartbeat command has no parameters. Evaluation of the resultCode in the XML
response shows if the connection to the communication module is still functioning properly. A
missing connection between the communication module and reader causes an alarm and/or
an error message.
Below the XML command for monitoring the connection (heartbeat) is described:
XML command
<command>
</command>
XML response
Below is the XML response without error entry
<reply>
</reply>
See also
Error messages (Page 71)
RF182C communication module
Operating Instructions, 10/2010
<heartbeat/>
<resultCode>0000</resultCode>
<heartbeat/>
Communication interface
6.4 Commands of the communication module
59