Factory Setting Of The Rf182C - Siemens RF182C Operating Instructions Manual

Parameterizing

5.3 Factory setting of the RF182C

5.3 Factory setting of the RF182C
Each RF182C is assigned a unique device ID (MAC address) before it leaves the factory.
The communication module is addressed via the IP address during configuration and
programming.
Therefore, you must first assign the IP address data (IP address and subnet mask) to the
RF182C so that it can be used in the Ethernet network. An IP address can be assigned to
the RF182C using the PST tool or via the web server.
Factory setting
● Default IP address setting: 192.168.0.100
● Default port setting (default:
Use the "Primary Setup Tool"
(http://support.automation.siemens.com/WW/view/de/19440762) software (V4-0 or higher) to
assign an IP address to the communication module.
40
– 10001 Reader 1
– 10002 Reader 2
RF182C communication module
Operating Instructions, 10/2010