Parameterizing
5.1 Address assignment for Ethernet
Port
A port is an access point that can be addressed by means of a specific function on the
device. For the RF182C, for example, the reader is addressed through port numbers.
Note
Port assignment via web server
The assignment of the ports can be changed via the web server. If no connection could be
established with the RF182C, check the port setting via the web server. The default port
setting is: 10001/10002.
You can then establish a connection via the set port numbers.
Figure 5-1
For more detailed information on socket programming, see section Socket programming
requirements (Page 81).
36
TCP/IP connection
RF182C communication module
Operating Instructions, 10/2010