Table of Contents
Advertisement
3.5
Disassembling the RF182C
Procedure
The RF182C is wired up and operating.
1. Switch off the supply voltage for the RF182C.
2. Disconnect the wiring on the connection block.
3. Remove the 4 fixing screws from the connection block and pull the connection block off
4. Disconnect the wiring on the base unit.
5. Remove the fixing screws from the base unit.
RF182C communication module
Operating Instructions, 10/2010
the base unit.
Note
See also section Loop-through of Ethernet and supply voltage (Page 30).
Mounting
3.5 Disassembling the RF182C
19
Hide quick links:
Advertisement
Table of Contents
