3
Disengage the tabs on the outer front panel (3 locations on the left side and 1 location on the right side).
Remove the outer front panel while pulling it slightly up.
18.3.2 Removing the Electrical Component Covers (2 & 3-way valve Cover and Terminal
Plate Cover)
1
Remove the screw (1 piece) of the electrical component cover (2 & 3-way valve cover). Slide the electrical
component cover (2 & 3-way valve cover) downward to remove it.
2
Remove the screws (2 pieces) and disengage the tabs (2 locations) of the electrical component cover
(terminal plate cover). Then, remove the electrical component cover (terminal plate cover).
156