Panasonic CS-VZ9SKE Service Manual page 144

18.1.7 Removing the Vertical Airflow Direction Louver

How to remove the lower louver of the vertical airflow direction louver.
1 Open the lower louver
2 The back side of the lower louver is designed as follows:
left - inserting type
center - hook engaging type
right - inserting into the motor with push-pull lock
3 Push the center hook to the left to disengage it.
4 Unlock the right shaft by push to right and pull back to left side and warp the center part of the lower louver
towards you and then pull out the left shaft. Then, remove the lower louver.

How to remove the upper louver of the vertical airflow direction louver.
1 Open the lower louver and then open the upper lower.
Shaft
2 The back side of the lower louver is designed as follows:
left - inserting type
center - hook engaging type
right - inserting into the motor with push-pull lock
3 Push the center hook to the left to disengage it.
4 Unlock the right shaft by push to right and pull back to left side and warp the center part of the lower louver
towards you and then pull out the left shaft. Then, remove the lower louver.
For details: Please refer steps to remove the vertical airflow direction lover.
Vertical airflow direction lower louver
Shaft
Vertical airflow direction upper louver
Hook
Hook
144
Push-pull
Shaft
Push-pull
Shaft