18.1.14 Removing the Drive Motor of the Vertical and Horizontal Direction Louver (right
side)
1
Perform "18.1.1 Removing the Front Panel".
2
Perform "18.1.2 Removing the Air Filters".
3
Perform "18.1.3 Removing the Front Grille (Right) and Front Grille (Left)".
4
Perform "18.1.4 Removing the Control Board (Electronic Controller)".
5
Perform "18.1.8 Removing the Indicator, Receiver & Human Sensor Control Board to below side".
6
Perform "18.1.9 Removing the Indicator, Receiver & Human Sensor Control Board from unit".
7
Perform "18.1.10 Removing the Electronic Controller Box and Bracket".
8
Perform "18.1.11 Removing the nanoe Controller Box".
9
Perform "18.1.13 Removing the Front Grille bracket (Frame - Air Filter)".
10 Remove the fan motor cover.
11 Remove the screws (2 pieces) from the drive motor complete and remove it from discharge grille.
Fan motor cover
Screw
148