Panasonic CS-VZ9SKE Service Manual page 152

18.2.2 Steps to install the vertical airflow direction louver (for the upper side)
1. First, align the tip of the main unit central axis to the hole of the vane central fixed part.
2. Slide the vane left axis to the left while aligning it with the left axis of the stepping motor and then insert the main
unit central axis and vane left axis simultaneously.
※ Make sure that the vane right axis and main unit central axis are inserted.
3. Insert the vane right axis in such a way as to slide it to the right while aligning it with the right axis of the stepping
motor.
※ When the replacement is finished, please plug in the power plug and check if it works fine.
Run the product and make sure that there are no abnormalities in the behaviors and sounds from the vertical airflow
direction louver (for the upper side).
central axis
left axis
left axis central axis
【Completion of Installation】
152
central axis