Installing The Fuse - Christie D13HD-HS User Manual

Installing the fuse

A fuse must be installed in the projector for it to power on.
1. Turn the projector off.
2. Choose the 20A or 15A fuse by sliding the AC cover to the right or to the left.
3. Remove the screw on the fuse with a flat-head screwdriver.
4. Remove the fuse and replace it with the new one.
• For regions using 200 to 240V-15A fuse.
• For regions using 100 to 120V-20A fuse.
• To order a fuse, see
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
page 82.
Installation
30