Christie D13HD-HS User Manual page 47

Saturation
Note the following about adjusting saturation:
• The saturation can be adjust independently for each color (R,G,B,C,M, and Y).
• A saturation level of 0 removes all color from that region.
• A saturation level of 254 sets the color region to have maximum color.
• A saturation level of 127 does not change the saturation.
Gain
Note the following about adjusting gain:
• The gain can be adjust independently for each color (R,G,B,C,M,Y, and W).
• The range of input is 0 to 254.
• The gain changes the intensity level of the respective color.
• A gain level of 127 disables the HSG controls for that color.
• A gain level less than 127 darkens the respective color.
• A gain level of 254 sets the color region to have maximum gain; however, clipping occurs on
the signal.
• A gain of 127 is the nominal setting.
• White provides three gain level controls, one each for the R,G,B component of white.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
Operation
47