Turning The Projector Off - Christie D13HD-HS User Manual

The status LED is green with a long blink.
5. To select an input source and turn it on, on the IR remote keypad select Input Key.
Available input sources are VGA, HDMI1, HDMI2, DVI, 3G-SDI, and HD-BaseT.
The projector detects the source you selected and displays the image.
Power on
1 2
The first time the projector is used, select the preferred language from the Main Menu after the
startup screen is displayed.

Turning the projector off

Power off the projector in preparation for inspection or maintenance.
1. To turn the projector off, on the IR remote keypad or built-in keypad press
A warning message appears on the displayed image.
2. To confirm your selection, press
If you do not press
projector remains on.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
1 2
again.
again, the warning message disappears after three seconds and the
Power on
1 2
SHUTTER
VGA BNC HDMI1
HDMI2 DVI-D DP
3G-SDI HDBaseT CVBS
PRESENT.
Input Key
1 3
Installation
1 3
.
24