Installation - Christie D13HD-HS User Manual

Installation

Warning! Failure to comply with the following could result in death or serious injury.
• This product must be installed within a restricted access location not accessible by the general
public.
• Only personnel who are trained on the precautions for the restricted access location can be granted
entry to the area.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! Operators must control access to the beam within
the hazard distance or install the product at the height (greater than or equal to 3.0 m from the
floor to the beam) that prevents exposure of the spectators' eyes within the hazard distance.
• Possibly hazardous optical radiation emitted from this product. (Risk group 3)
For more information, see
Installations shall be completed by trained professional installers who are familiar with the product,
associated hazards and laser safety precautions. The area shall be cleared of all non-essential
personnel during installation, setup and alignment of the projector. Verify safe installation of the
projector by completing the
following the Setup, alignment and test procedures
Learn how to install, connect, and optimize the projector display.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
Light intensity hazard distance
Christie Laser Projection System Installation Checklist
on page 11.
on page 33.
on page 87 and by
20