Laser Label - Christie D13HD-HS User Manual

Laser label

CLASS 1 LASER PRODUCT IEC 60825-1:2014
Warning! Failure to comply with the following could result in death or serious injury.
• This product must be installed within a restricted access location not accessible by the general
public.
• Only personnel who are trained on the precautions for the restricted access location can be granted
entry to the area.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! Operators must control access to the beam within
the hazard distance or install the product at the height (greater than or equal to 3.0 m from the
floor to the beam) that prevents exposure of the spectators' eyes within the hazard distance.
• Possibly hazardous optical radiation emitted from this product. (Risk group 3)
• This projector has a built-in Class 4 laser module. Never attempt to disassemble or modify the
projector.
• Any operation or adjustment not specifically instructed in the User manual creates the risk of
hazardous laser radiation exposure.
• Do not open or disassemble the projector as this may cause damage from exposure of laser
radiation.
• PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam must be
permitted. RG3 IEC 62471:2006.
• Install the product so users and the audience cannot enter the restricted area at eye level.
• Follow the control, adjustment, or operation procedures to avoid damage or injury from exposure
of laser radiation.
• The instructions for the assembly, operation, and maintenance include clear warnings concerning
precautions to avoid possible exposure to hazardous laser radiation.
• Installing or replacing a lens must be done by a Christie qualified service technician to avoid
exposure to dangerous emission levels.
• Not for household use.
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
Safety
10