The following table provides information about the power input behavior.
Condition
Normal
Abnormal
Normal
Abnormal
•
If the filter is installed incorrectly, the projector displays the following warning:
Filter is installed incorrectly.
Power off the projector and check the filter installation.
•
Pump is malfunctioning, for example the motor or pump has stopped operating. The projector
displays one of the following warnings:
Pump 1 is not working as expected. Check pump functionality.
Pump 2 is not working as expected. Check pump functionality.
•
If the end-user presses the source key on the IR remote keypad that is not supported, for
example BNC(2), the projector displays the following warning:
Not supported
Regulatory
This product conforms to the following regulations related to product safety, environmental
requirements and electromagnetic compatibility (EMC).
Safety
•
CSA C22.2 No. 60950-1
•
UL 60950-1
•
IEC 60950-1
•
EN 60950-1
HS Series User Manual
020-000883-03 Rev. 1 (07-2016)
Input
AC Socket
Input Voltage
110V
110V
110V
220V
220V
220V
220V
110V
Projector Behavior (Light Source Mode)
Full (100% power)
ECO 2 (50% power); displays warning message
Full (100% power)
ECO 2 (50% power); displays warning message
Specifications
85