Umts Settings - GeoVision GV-Compact DVR V2 User Manual

4.7.5 UMTS Settings

UMTS stands for Universal Mobile Telephone System. UMTS is a third-generation (3G)
broadband, packet-based transmission of text, digitized voice, video, and multimedia at data
rates up to 2 megabits per second. UMTS offers a consistent set of services to mobile
computer and phone users, no matter where they are located in the world.
After a mobile broadband device (supporting UMTS, HSDPA and etc) is attached to the USB
port on the GV-Compact DVR V2 and the UMTS function is enabled, the GV-Compact DVR
V2 can have Internet access. For the supported mobile broadband devices, see Appendix B.
STATE: Enable the UMTS function.
PIN NUMBER: Enter the PIN number that is provided by your network operator.
APN: Enter the Access Point Name (APN) that is provided by your network operator.
USERNAME: Enter a valid username to enable the UMTS service from your network
operator.
PASSWORD: Enter a valid password to enable the UMTS service from your network
operator.
MTU: Enter the Maximum Transfer Unit (MTU). The default vale is 1500.
IP Address: The IP address of the GV-Compact DVR V2 will be displayed after enabling
the UMTS service. The next time when you want to log in the GV-Compact DVR V2, you
need to enter the IP address into your browser. If you use the UMTS connection with
dynamic IP addresses, it is highly suggested to enable the DDNS function that links a
domain name to the unit's changing IP address. For details on DDNS, see 4.7.6 DDNS
Settings.
50
Figure 4-33