Turning On The Power - GeoVision GV-Mini User Manual

Getting Started
3

3.2 Turning on the Power

Once the above hardware is properly connected, it is the time to turn on the GV-Mini DVR V2.
To turn on the power, follow these steps:
1. Turn on the monitor.
On
Figure 5
2. Press the power button on the front panel.
Figure 6
The GV-Mini DVR V2 will run a series of self-tests. After two or three minutes a series of
messages may be displayed as the various hardware and software subsystems are activated.
After this finishes, the GV-System Software (Multicam Surveillance System) should load
automatically and bring you to the main screen with 4, 8 or 16 cameras display.
15