Clerk Sign-On/Sign-Off; Direct Sign-On; Coded Sign-On - Sam4s ER-5200 Operation And Program Manual

Clerk Sign-On/Sign-Off

See "System Option Programming", to review your clerk options:
Depending on how your machine has been programmed, sign-on will take place only at the
beginning of a shift (stay-down), or may have to be repeated for each transaction (pop-up). If
your machine has been programmed for stay-down clerks, the clerk currently signed on must
be signed off before another clerk may be signed on.

Direct Sign-On

There are two ways to sign on a clerk. One is to enter the clerk number and press
the clerk key and the other is to enter direct clerk no. key.
There are two ways to sign the clerk off. One is to enter 0 (Zero) and press the clerk key and
the other is to enter 0 (zero) and press direct clerk no. key.

Coded Sign-On

To sign on a clerk, press the clerk key, enter the clerk code, then press the clerk key again.
CLERK
To sign the clerk off, enter 0 (Zero) and press the clerk key.
0
ER-5200/40/15
•
System option #2 allows you to select direct or code entry sign on and/or stay-
down or pop-up operation.
CLERK
Clerk # (1-15)
CLERK 1 ~ CLERK 10
0 CLERK
0
CLERK 1 ~ CLERK 10
Clerk Code (up to 6 digits)
CLERK
CLERK
Operating Instructions • 23