Program Scans
Since much time and energy has been invested in the planning and programming of your ER-5200/5240/5215, it is
advisable to print a hard copy of the final program for future reference. This copy should be kept in a safe place.
ER-5200/40/15
1. Turn the control lock to the P position.
2. To print a program scan, enter 1 5, press the SBTL key.
1
5
SBTL
3. In this step, there are three different ways to scan program information. One is
PLU, the other is Macro, The third is Others.
PLU PROGRAM SCAN
To read one PLU program information, enter the number (1-1000) of the PLU and
press the same number and PLU key.
Enter the PLU#,
up to 15 digits
Press a PLU key on the keyboard and press same key again.
PLU 1
PLU 1
To read multiple PLU program information, enter the first number and
press PLU key. Press the last number and press PLU key.
Enter the first
PLU#, up to 15
digits
Press a PLU key on the keyboard .
PLU 1
PLU 10
MACRO PROGRAM SCAN
To read MACRO information, press the MACRO key to be scanned,
MACRO#
MACRO#
Enter the PLU#,
PLU
up to 15 digits
Enter the last
PLU#, up to 15
PLU
digits
PLU
PLU
Program Mode Programming • 181