Training Mode Password - Sam4s ER-5200 Operation And Program Manual

Training Mode Password

If you wish to use training mode, you must program a password that you will use to enter
training mode. The password may be up to 4 digits long, however, if you choose to use a
password less that for digits, you must enter preceeding zeros to complete a 4 digit entry. For
example, if you program the password to be "77", you must type "0077" when entering training
Programming the Check Change Limit
178 • Program Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 18 0 0, press the SBTL key.
1 8 0
3. Enter a 4-digit password and press the X/TIME key.
Enter the Password
up to 4 digits
4. Press the CASH key to finalise the program.
CASH
0 SBTL
X/TIME
ER-5200/40/15