Overview - Sam4s ER-5200 Operation And Program Manual

Table Management and Clerk Interrupt Operations

Overview

The ER-5200 series can employ a manual previous balance, hard check, or soft check
system. (You must select hard or soft check posting in memory allocation programming - the
default selection is soft.)
There are two methods in ER-52xx series to manage check track. One is table management
system and the other is clerk interrupt system. If you want to use clerk interrupt system.
First, Program as below.
To Enter Clerk Interrupt System (To Exit Table Management system )
To Exit Clerk Interrupt System(To Enter Table Management system)
62 • Operating Instructions
1.Program Clerk Secret Code
2.Set system option #2 to a value of 1. See "System Option Programming"
3.Set system option #26 to a value of 1. See "System Option Programming".
Set system option #26 to a value of 0. See "System Option Programming" .
ER-5200/40/15