Table of Contents
Advertisement
Appendix
Appendix
Synchronized operation of two
multiplexers
You can operate two multiplexers of the same model in
synchronized mode in a single system, with one multi-
plexer working as a master unit and the other as a
slave device.
You can program different image sequences for the
master unit (one for the main monitor and another for
the second monitor). The device connected as a slave
unit adopts the same programming as the master unit,
allowing both units to run in synchronized operation.
When programming this unit, use the REMOTE IN/
OUT socket and make the necessary configuration
adjustments in the OPTION menu.
• Connect contact No. 24 of the master device to
contact No. 25 of the slave unit (REMOTE IN/OUT
sockets).
• Switch to the OPTION menu in the master unit.
• Set the desired dwell periods for
automatic sequencing in
SEQUENCE DWELL TIME (OUT1 for the main
monitor, OUT2 for the second monitor).
• Switch to the OPTION menu in the slave unit.
• In SEQUENCE DWELL TIME, set both values
(OUT1 and OUT2) to 00SEC.
48
1.USER OPTION
10-SEG CAMERA SELECTION
LOWER LEFT
LOWER RIGHT
SEQUENCE DWELL TIME
INITIAL(CAMERA) 10SEG 2
REC PTN SEL
1.USER OPTION
10-SEG CAMERA SELECTION
LOWER LEFT
LOWER RIGHT
SEQUENCE DWELL TIME
INITIAL(CAMERA)
REC PTN SEL
System examples
01
05
OUT1
05SEC
OUT2
15SEC
1
07
05
OUT1
00SEC
OUT2
15SEC
10SEG 2
1
ZS-SX Series
Advertisement
Table of Contents
