Intended Use; European Directives; Identification Plate - Ganz ZS-SX Series Installation And Operating Instructions Manual

Table of Contents

Advertisement

Introduction
Introduction
These installation and operating instructions are de-
signed for the use of anyone concerned with the
setting-up or day-today use of the unit. All persons
involved in carrying out installation work (i.e. qualified
electricians or service engineers), must ensure that
they are familiar with the unit's electrical and electronic
systems and should follow the applicable safety rules
and other relevant legislation at all times.

Intended use

The multiplexers in the ZS-SX range are designed for
professional use as part of video surveillance systems.
These units are designed for the sequential recording
and playback of various camera images on a single
video recorder and for simultaneous display of these
pictures on one or two monitors.
The installation and maintenance of these units should
be carried out by qualified electrical service techni-
cians only.
If you have any queries concerning the operation of
these devices, which are not covered by this manual,
please contact the supplier at:
CBC (Deutschland) GmbH
Hansaallee 191
D – 40549 Düsseldorf
Tel: +49 (0) 2 11 53 06 70
Fax: +49 (0) 2 11 53 06 71 80
CBC (Europe) Ltd.
7/8 Garrick Industrial Centre, Irving Way
GB – London NW9 6AQ
Tel: +44 (0) 208 732 33 12
Fax: +44 (0) 208 202 33 87

European directives

Multiplexers ZS-SX116P and ZS-SX109P fulfill the
protection requirements established in European
directives 89/336 (electromagnetic compatibility) and
73/23, as amended by 93/68 (low-voltage devices).
4

Identification plate

Precise identification of each device is provided by the
plate fixed to the rear of the unit, which shows its
model designation (1) and serial number (2). Please
copy these details into the box below. This will ensure
that you have the required data to hand if a query
arises or whenever you need to order spares.
Model:
Serial number:
ZS-SX Series

Advertisement

Table of Contents
loading

Table of Contents