Table of Contents
Advertisement
ALARM DATA menu
The ALARM DATA menu is described in the section on
operation (see page 17).
TITLE menu
You can enter names for the purpose of identifying each
multiplexer camera connection. This information can be
superimposed on-screen (see page 36). Camera names
can consist of up to eight characters. For purposes of
orientation, the corresponding camera image is dis-
played while the characters are being entered.
5-1.CAMERA SEL FOR TITLE
01.Drive
02.Garage
03.Foyer
04.Carpark1 12.12
05.Carpark2 13.13
06.Store A
07.07
08.08
Once you enter the camera ID number, a further
character-selection menu will be displayed:
5-2.CH 01 TITLE SETTING
Drive****
< > SPACE CLEAR
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
!?/()<>:.•,-
&#
ZS-SX Series
09.09
10.10
11.11
14.14
15.15
16.16
• Use the cursor keys to navigate around the display
and select each desired character for the camera
name.
• Press SELECT to enter the character currently
highlighted.
• Highlight SPACE and press SELECT to insert a
space between characters.
• Highlight CLEAR and press SELECT to delete the
entire camera name.
• Select the < or > symbols next to SPACE and
press SELECT to highlight a particular character in
the camera name.
• Finally, press the MENU button to enter further
camera names.
Programming
37
Advertisement
Table of Contents
