Zoom (2× Enlargement); Pan-And-Tilt Function - Ganz ZS-SX Series Installation And Operating Instructions Manual

Zoom (2× enlargement)
(only during playback or in multiviewer mode)
You can magnify a camera image to double its normal
size, even if the camera is only fitted with a normal
lens with fixed focal length.
Note
The quality of the electronic zoom image
depends on the resolution of each camera.
The image is enlarged, but no new details
are added – as would be the case with
optical enlargement.
• Select CAMERA or VCR operating mode and acti-
vate the playback function if applicable.
• Press a camera button.
• Press the ZOOM button. The enlarged image is
displayed, with the word ZOOM superimposed.
• Press FULL to return to normal display mode.

Pan-and-tilt function

(only during playback or in multiviewer mode)
This feature allows you to explore the enlarged image
– displayed in ZOOM mode – by moving up and down
and from side to side, allowing you access to the
entire field of view of the camera.
This feature is provided by the electronic pan-and-tilt
function of the multiplexer.
Note
The pan-and-tilt function is limited to the field
of view of the camera in question, and can-
not be extended beyond the visible range
available in full-screen display mode.
• Press the ZOOM button. The enlarged image is
displayed, with the word ZOOM superimposed.
• Use the cursor keys to explore the displayed sec-
tion of image.
• Press the left and right cursor keys together to
activate the automatic panning function. The view
of the section of image will automatically pan from
side to side.
• Press ZOOM to return to the center of the image.
• Press FULL to return to normal display mode.
ZS-SX Series
Operation
13