Table of Contents
Advertisement
Displaying several camera images
(only during playback or in multiviewer mode)
The multiplexer offers several features that allow simul-
taneous display of different camera images within a
split screen. Several split-screen options are available,
as follows:
❚ 4 segments (quad-splitting)
❚ 9 segments
❚ 10 segments (only in multiviewer mode)
❚ 16 segments (ZS-SX116 only)
The selection of large images for splitting into 10
segments is established at the programming stage.
Camera details are not superimposed on a split-
screen display.
Multiple splitting
• Select CAMERA or VCR operating mode and acti-
vate the playback function if applicable.
• Press MULTI SCREEN button to display initial split
screen. The buttons corresponding to the selected
cameras will be illuminated.
• Press the MULTI SCREEN button again to display
further split screens.
• Press the GROUP SELECT button to change from
one camera group to another (if screen-splitting is
not suitable for the simultaneous display of all
camera images).
• Press the FULL button to display the last selected
camera image in full-screen mode
or
Press any camera button in order to display the corre-
sponding single image in full-screen mode once more.
The button of the selected camera will now light up.
Quad-splitting
• Press the quad-splitting button. Four different came-
ra images will be displayed. The buttons correspon-
ding to the selected cameras will be illuminated.
• Press the quad-splitting button again to change
from one camera group to another.
• Press the SEQUENCE button to change automati-
cally from one camera group to another.
• Press the FULL button to display the last selected
camera image in full-screen mode
or
Press any camera button in order to display the corre-
sponding single image in full-screen mode once more.
The button of the selected camera will now light up.
ZS-SX Series
Operation
11
Advertisement
Table of Contents
