Table of Contents
Advertisement
Search function
(only in multiplexer mode)
In order to be able to reproduce recorded images, the
multiplexer searches for the video signal code at-
tached to each recording (see page 49). The multi-
plexer cannot read this code if the tape is being fast-
forwarded in search mode, and so does not display
any image on the monitor. If you wish to display the
recorded images in these circumstances, you will
need to activate the search function of the multitiplex-
er.
• Select VCR mode.
• Set the VCR switch to position 1 or 2 to select one
of the video recorders.
• Press the VCR MENU MODE button on the multi-
plexer.
• Activate the SEARCH function on the VCR unit.
On-screen video recorder menu
In order to be able to reproduce recorded images, the
multiplexer searches for the video signal code at-
tached to each recording (see page 49). If no tape is
being reproduced – e.g. during programming of the
VCR via the on-screen menu – no code is transmitted
to the multiplexer and no image is therefore displayed
on the monitor.
If you wish to display the on-screen video recorder
menu, you will need to activate the multiplexer VCR
menu function.
• Select VCR mode.
• Set the VCR switch to position 1 or 2 to select the
video recorder.
• Press the VCR MENU MODE button on the multi-
plexer.
• Activate the on-screen menu function of the video
recorder.
Note
Where possible, deactivate any superim-
posed video recorder text functions (such as
date and time) that may interfere with the
information texts related to the images being
displayed.
ZS-SX Series
Operation
19
Advertisement
Table of Contents
