Table of Contents
Advertisement
Acknowledging an alarm
Alarms are automatically reset after a maximum of five
minutes, or have to be reset manually. The details
depend on how the system has been programmed.
The alarm function of the multiplexer can be pro-
grammed so that an alarm message remains active
(even if it has been acknowledged) as long as the
cause of the alarm – such as an open door – has not
been rectified. In this case, the alarm cannot be reset
unless appropriate steps are taken (e.g. by shutting
the door) to remove the original cause. Once the
cause of the alarm has been dealt with, the alarm
button will stop flashing and light up continuously.
• Press the ALARM RESET button to acknowledge
the alarm. The red alarm button will stop flashing.
• If the alarm is still active, wait for the button to light
up continuously. Then press the ALARM RESET
button to acknowledge the alarm. The red light on
the alarm button will go out.
Note
Press the flashing red alarm button only if
you wish to reset all current alarm functions
and erase all on-screen alarm messages.
Alarm list
This feature allows you to display a list of the last 64
alarm incidents. The data are displayed in chronologi-
cal order, with an L to identify those caused by cam-
era failure. Once there are more than 64 incidents in
the list, the oldest item is automatically deleted.
• When required, press the ALARM RESET button to
acknowledge the alarm. The red alarm button will
stop flashing.
• Keep the MENU button pressed for about three
seconds to display the main menu.
• Press SELECT to activate the normal menu display.
• Press the cursor keys until the ALARM DATA menu
item flashes.
• Press the SELECT button to display a list of the
eight most recent alarm incidents.
• Press the cursor buttons again if you wish to dis-
play any further entries.
• Finally, press the MENU button repeatedly until the
menu disappears from the display.
If no entries are made, the menus will be cancelled
automatically after a short time.
ZS-SX Series
4.ALARM DATA DISPLAY
DATE
TIME
43 JAN.01 04:28:52
42 JAN.01 04:30:11
41 JAN.01 04:34:13
40 JAN.01 04:25:02
39 MAR.26 22:28:52
38 MAR.26 22:31:01
37 APR.04 18:28:12
36 APR.14 21:19:16
Operation
CAMERA
03L
06L
01
04
03
08
02L
01
17
Advertisement
Table of Contents
