Displaying Camera Images On The Second Monitor - Ganz ZS-SX Series Installation And Operating Instructions Manual

Displaying camera images on the
second monitor
The second monitor allows you to view the pre-pro-
grammed sequence of camera images or – after
selection of the corresponding camera – an individual
camera image.
This selection is independent of the main monitor
selection, which allows you – for example – to split the
main monitor into nine segments and use the second
monitor to display the pre-programmed image se-
quence.
Note
The multiplexer can also be programmed to
provide synchronized operation of the two
monitors. In this case, no independent func-
tions are available to the second monitor.
• Select CAMERA or VCR operating mode and acti-
vate the playback function if applicable.
• Press the SPOT button to activate operation of the
second monitor. The button will flash.
• Press a camera button. You will see the correspon-
ding camera image displayed on the second moni-
tor. The button of the selected camera will now light
up.
• Press the SEQUENCE button. You will now see a
succession of various camera images. The buttons
corresponding to the selected cameras will be
illuminated.
• Press the SPOT again to return to operation of the
main monitor. The last-used second monitor set-
tings are retained as the default configuration.
Note
If you press a button corresponding to a
function that is not available on the second
monitor (e.g. ZOOM), the system returns
automatically to main-monitor operation. The
SPOT button stops flashing.
ZS-SX Series
Operation
15