Table of Contents
Advertisement
Operation
Displaying individual camera images
The monitor normally displays the images from each
camera in a pre-programmed sequence. However, if
you wish to display a specific image, you may also
select an individual camera.
• Select CAMERA mode.
• Press the button corresponding to the camera you
wish to select. The button will now light up.
There may be no camera image to display under
certain circumstances:
❚ If no camera is connected or the camera in questi-
on has been switched off. In this case, the monitor
will display only a blue or black-colored blank
screen.
❚ If the camera is malfunctioning. In this case, the
alarm button will flash and the letters VL (= video
loss) will appear on-screen, along with the ID num-
ber of the affected camera.
Automatic sequencing
The multiplexer is programmed to determine the order
in which the successive camera images are to be
automatically displayed in sequence on the monitor.
The dwell time for each camera is likewise pro-
grammed into the system. As soon as this period
expires, the multiplexer switches over to the next
camera image in the sequence.
• Select CAMERA mode.
• Press the SEQUENCE button. You will now see a
succession of various camera images. The buttons
corresponding to the selected cameras will be
illuminated.
10
ZS-SX Series
Advertisement
Table of Contents
