Table of Contents
Advertisement
Programming
Highlighting and selection
For the purposes of orientation, the currently selected
option (e.g. menu items or adjustment values) flashes
on the display. The next action always follows on from
the highlighted option.
• Use the cursor buttons to change this selection.
• Press the SELECT button to access the active
menu or select one of the highlighted parameter
options.
• Press the MENU button again to return to the
previous menu.
Navigating around the menus
The initial display shows the two main menu options.
These menu items divide into further submenus, in
which certain system functions are grouped. All men-
us are described in succession in this manual.
The configuration parameters are organized into logi-
cally-based groups, which allows the multiplexer to be
fully programmed as you move from menu to menu.
Note
Work systematically through the program-
ming procedure, carrying out all the opera-
tions corresponding to each menu before
moving on to the next.
Saving your settings
All menu configuration changes enter into effect either
immediately or as soon as the menu disappears from
the display. There is no need for a special configura-
tion saving procedure.
Quick-programming
You can program the main system parameters by
means of the Quick Setup menu, which allows you to
start using the multiplexer in just a few minutes. The
Quick-Setup menu forms part of the overall menu
structure. All parameters in the Quick-Setup menu are
also available in the normal menus.
This manual likewise contains information on all set-
ting possibilities available via this overall menu struc-
ture (NORMAL MENU).
32
3-2.DATE/TIME SETTING
TUE.FEB.21 00
08:51:00
ZS-SX Series
Advertisement
Table of Contents
