Armrest Installation - Argon 18 E-119 TRI+ Assembly Manual

E-119 TRI+: 14. Armrest Installation
5.1
GREASE
4.14
4Nm
4.12.4 4.12.5
4.12.2
1. Install the adhesive Velcro on the armrests (4.12.4 and
4.12.5).
2. Screw the armrests into the extension bar connector bridge
(4.12.2) at 5Nm in the desired position. Reverse the left and
the right armrests to obtain a more forward or backward setup.
3. Finish the assembly by installing the armrest pads (5.1).
42