Table of Contents
Advertisement
GALLIUM CS DISC 362A/B
* Optional parts available separately
100362
IMPORTANT:
No more than 30mm of spacers can be placed between the
stem and the top cap of the Headset.
The steerer must be trimmed no more than 5mm above the
stem. The use of more than 5mm of spacers above the stem
could void the efficiency of the compressor.
These practices will automatically void any warranty claim
against the manufacturer.
5.4. Headset Installation
Install the 3D headset column if
desired. You can choose from 3
different heights: 25mm (100361),
15mm (100362) or 0mm. For 0mm
configuration, the bearing is placed
directly in the frame.
100361
100156
11
Advertisement
Table of Contents
