5. Parts listing ..........8-9 For the warranty to be valid, the bicycle must be fully assembled by an authorized Argon 18 dealer. High-end components, particularly carbon parts, need extra care when assembled.
ELECTRON PRO : Assembly overview 1. Frame inspection 2. Headset installation 3. Seatpost installation Images are for reference only. Proportions are not accurate. 4. Saddle adjustment 5. Parts listing...
ELECTRON PRO : 1. Frame inspection When assembling a new frame, be sure to check if the following parts are assembled correctly. Parts installed on the frame Description Screw Torque Detail type Drop out insert with screws Screw (6) Loctite...
ELECTRON PRO : 2. Headset installation Install the 3D headset (5) according to the pressfit assembly guide. You can choose from 3 different heights: 25mm, 15mm or 0mm.
ELECTRON PRO : 3. Seatpost installation CARBON FIBER ASSEMBLY COMPOSITE 1. Make sure the clamp (4c) sits GREASE correctly on the seat tube. 2. Insert the seatpost (3) on which some carbon fiber assembly gel has been applied. 3. Position the seatpost at the desired...
ELECTRON PRO : 4. Saddle adjustment 1. Install the saddle on the rocker (3f) and slightly tighten the rail clamp (3d) using a ball end hex key. 2. Tighten the upper screw of the rocker clamp (3a) by keeping a space of 2 to 3mm between the aluminum and carbon parts.
ELECTRON PRO : 4. Saddle adjustment The 2waypost ASP-4000 can be flipped to achieve a triathlon or a road position (75°/78°). The seat clamp offset can be set by flipping the rail clamp (3d) and the rocker (3f). Road : -10mm to -15mm...
ELECTRON PRO : 5. Parts listing Name A18 SKU# Frameset Parts Electron Pro frame Electron Pro fork FK.ELECC.244A Seat post with the following parts assembled Electron Pro seat post (ASP-4500) SP.ELECC.244A • Upper HexSocket screw (M6*20mm S) for rocker clamp •...