Argon 18 E-119 TRI+ Assembly Manual page 37

E-119 TRI+: 12. Cable Housing Installation (Gears)
2. Install cable housing caps on cable housing ends and
connect the front and rear housing to the bottom bracket
(BB) guide corresponding inscriptions: - FD=front derailleur,
RD=rear derailleur.
NOTE: The rear brake (RB) is not used. The cable housing is
internaly routed to the rear brake.
3. Thread cable housing through frame starting from triangular
opening and all the way through the BB opening.
4. Insert BB guide back into the frame recess.
1.12
36