Seat Post Installation - Argon 18 E-119 TRI+ Assembly Manual

E-119 TRI+: 5. Seat Post Installation
6Nm
1. Unscrew main bolt (A) as far as
6Nm
possible without fully removing from
the lock nut.
B
2. Install the saddle rails into the
seatpost clamp (B).
3. Slide saddle clamp (B) onto rocker (C).
4. Tighten the bolt up at 12Nm.
GRIP PASTE
A
See p.43 for saddle adjustment.
C
12Nm
IMPORTANT:
The E-119 Tri+'s saddle rail clamp is
made for aluminum and round-shaped
GRIP PASTE
saddle rails (Ritchey's WCS Alloy 1-Bolt
Clamp Kit - Part #: 55055467004).
For other types of saddle rails, please
refer to the Tips and Troubleshooting
section of this Assembly Guide (p.50).
7