Engine Oil Change And Oil Filter Replacement; Valve Adjustment; Coolant Replacement; Fuel Injection System - Sea-doo GTX 4-TEC Operator's Manual

WARNING
If throttle lever does not auto-
matically return, do not operate
watercraft and see your authorized
Sea-Doo dealer.
1. Should move freely
2. Slight free-play must be present here
Engine Oil Change and Oil
Filter Replacement
The oil change and filter replacement
should be performed by an authorized
Sea-Doo dealer.

Valve Adjustment

There is no valve adjustment to be per-
formed on this engine.

Coolant Replacement

The coolant replacement should be
performed by an authorized Sea-Doo
dealer.

Fuel Injection System

The fuel injection system inspection
should be performed by an authorized
Sea-Doo dealer. Fuel system pres-
surization should be conducted at the
same time.

Steering Alignment

When the handlebar is directed in
straight ahead position, the jet pump
nozzle should be in the same direc-
tion allowing the watercraft to run in
a straight line. The rear edge of side
vanes should be pointing out side by
approximately 20° when the handle-
bar is pointing straight ahead.
______________________
96
1. Approximately 20° when handlebar is
pointing straight ahead
Refer to an authorized Sea-Doo dealer
if an adjustment is necessary.
WARNING
Ensure the handlebar and jet
pump nozzle operate freely from
side to side and are not stress-
ing the steering cable or brackets.
Never turn handlebar while some-
one is nearby rear of watercraft.
Keep away from steering moving
parts (nozzle, side vanes, linkage
etc.).
VTS Adjustment
(if so equipped)
Push on arrow pointing upward on VTS
button until the VTS stops. The nozzle
should be up without interfering with
the venturi.