Sea-doo GTX 4-TEC Operator's Manual page 60

– After installation, pull and push
wakeboard to ensure it is tightly
secured to rack.
WARNING
If wakeboard is not properly se-
cured on rack, it could become
loose and detach unexpectedly,
creating a risk of injury to people
nearby. To avoid:
– Inspect bungee cords condition
and replace if damaged.
– Secure wakeboard properly on
rack.
– Periodically check that board is
properly attached.
NOTE: When wakeboard is removed
from its rack, secure bungee cords so
that they will not move freely when
riding watercraft.
______________________
58
CAUTION: The rack is designed to
hold one wakeboard. Do not use
to hold more than one wakeboard
or to transport ski or any other ob-
ject. Do not use rack(s) as mooring
points or to reboard.
WARNING
With wakeboard and/or rack in-
stalled, operate with extra caution:
– NEVER perform agressive ma-
neuvers including spin-out.
– NEVER jump waves
– Use common sense and limit
speed.
Otherwise, wakeboard could de-
tach or occupants could fall off and
get injured against the wakeboard
or rack.
WARNING
When trailering the watercraft,
NEVER leave a wakeboard in-
stalled on the rack. Otherwise,
wakeboard fin(s) could cause in-
jury to bystanders or wakeboard
could fly off on the road. The
bungee cords are under tension
and could spring back and whip
someone when released.
caution.
Removal is reverse of installation.
Use