Information Center Gauge - Sea-doo GTX 4-TEC Operator's Manual

7) Information Center
Gauge
This is a multifunction gauge that
supplies several real time useful infor-
mation to the driver either in English,
French or Spanish. See an authorized
Sea-Doo dealer for unit settings.
At start-up, all LCD segments and in-
dicator lights will turn on for 3 sec-
onds each time the information center
is activated (when safety lanyard is in-
stalled). This allows the driver to vali-
date they are all working properly.
smo2006-002-009_a
GTI MODELS
1. Speedometer
2. Tachometer
3. Fuel level
4. Information display
5. Indicator lights
smo2006-002-008_a
OTHER MODELS
1. Speedometer
2. Tachometer
3. Fuel level
4. Information display
5. Indicator lights
6. Water depth display
7. Water temperature display
8. VTS position indicator
______________________
40
1) Speedometer
Speedometer indicates the speed of
watercraft in miles per hour (MPH) or
kilometers per hour (km/h).
2) Tachometer
Tachometer indicates the revolutions
per minute (RPM) of the engine. Mul-
tiply by 1000 to obtain the actual revo-
lutions.
3) Fuel Level
Bar gauge continuously indicates the
amount of fuel in the fuel tank while
riding. A low-fuel condition is also in-
dicated on the information display as
only one bar is displayed. See MES-
SAGE DISPLAY below.
4) Information Display
Compass
Displays the cardinal points to indicate
the orientation of the watercraft.
WARNING
Use the compass as a guide only.
Not to be used for navigation pur-
poses.
GTI Models Only
Water Temperature (if so equipped)
Displays the water temperature of the
water surface in degrees Celsius (°C)
or Fahrenheit (°F).
NOTE: Water temperature and depth
gauge will be displayed alternately.
Water Depth (if so equipped)
Display the water depth under the hull
within 0 to 50 meters (0 to 170 feet).
NOTE: Under certain conditions, the
gauge may stop displaying.
gauge ability to display the depth
depends on the usage conditions.
The