Seat Cover (If So Equipped); Rear Grab Handle - Sea-doo GTX 4-TEC Operator's Manual

1. Latch hole
2. Pin
Engine Compartment
Removing the seat gives access to the
engine, electrical and fuel systems.
WARNING
Certain components in the engine
compartment may be very hot.
Direct contact may result in skin
burn. When starting or operating
the engine, do not touch any elec-
trical part. Never leave any object,
rag, tool, etc., in the engine com-
partment or in the bilge.
18) Seat Cover
(if so equipped)
WARNING
Never sit on the seat cover.
The seat cover allows to install a num-
ber on its side panels. It is removable
to expose the seat for a passenger.
To remove cover:
Unlatch and pull seat out.
Unlock the quarter-turn screws.
Pull cover tabs each side of seat then
remove cover.
Install seat and properly relatch.
To reinstall cover:
Unlatch and pull seat out.
Position rear of cover in place without
inserting front tabs yet.
Carefully pull tabs outward each side
of seat and insert cover in place.
Finish pushing cover in position then
lock the quarter-turn screws.
Install seat and properly relatch.

19) Rear Grab Handle

Provides a handhold for boarding
when needed and a handhold for
the passenger or the spotter. See
illustration above.
_____________________
47