Low-Charge Battery Condition - Sea-doo GTX 4-TEC Operator's Manual

1. Vent tube
Lift lock tab and holding the tab, pull
the tube to release it.
1. Lift lock tab
Then proceed with the tab under the
tube. Refer to the following illustra-
tion to see it.
1. Other lock tab under tube
______________________
86
Snugly install the hose pincher on the
water supply hose as shown.
TYPICAL
1. Hose pincher
NOTE: A red tape on the water supply
hose indicates which hose to pinch.
CAUTION: When finished towing
the watercraft, hose pincher must
be removed before operating it.
Failure to do so will result in dam-
age to the engine.
After removal of hose pincher, proper-
ly reinstall and lock vent tube. When
pushing tube in place, you should hear
a click that validates it is locked.
Low-Charge Battery
Condition
See an authorized Sea-Doo dealer to
have it charged or replaced.
WARNING
Do not charge or boost the battery
while installed on the watercraft.
Electrolyte is poisonous and dan-
gerous. Avoid contact with eyes,
skin and clothing.