Preseason Preparation Chart - Sea-doo GTX 4-TEC Operator's Manual

Preseason Preparation Chart

NOTE: It is highly recommended that an authorized Sea-Doo dealer perform
the annual safety inspection and factory campaigns in addition to the preseason
preparation all at the same time.
GENERAL
ENGINE
COOLING
SYSTEM
FUEL SYSTEM
ELECTRICAL
SYSTEM
STEERING
SYSTEM
O.P .A.S.
SYSTEM
PROPULSION
SYSTEM
HULL AND
BODY
(1) Before installing new spark plugs, it is suggested to burn the excess XP-S LUBE or
equivalent by starting the engine using the old spark plugs.
(2) Safety item covered in the annual safety inspection.
_____________________
106
OPERATIONS
Lubrication/corrosion protection
Spark plug replacement
Exhaust system condition and fasteners
Condition of seals and fasteners
Oil level
Inspection of cooling system coolant level, hoses
and components if antifreeze was not changed for
storage, drain and replace with new antifreeze.
Fuel filter replacement
Fuel injection sensors verification
Fuel system; check valves, lines, fasteners,
pressurization
(2)
Filler neck, fuel tank and fuel cap condition
Fuel tank straps
Refill fuel tank
Battery condition/charging and reinstallation. Set
the preferences in information center.
Battery, starter connections and routing
Monitoring beeper
Digitally encoded security system
Steering system adjustment/inspection
Check O.P.A.S. system condition
Shifter system condition and cable adjustment
VTS (Variable Trim System, if so equipped)
Propulsion system inspection
Inspection of drain plugs
Ski/wakeboard post and fasteners
(1)
(2)
(2)
TO BE
PERFORMED
BY
Operator
Dealer
Dealer
Dealer
Dealer
Dealer
Dealer
Dealer
Dealer
Dealer
(2)
Operator
Operator
Dealer
Dealer
Dealer
Dealer
Dealer
Dealer
Dealer
Dealer
Dealer
Dealer
Operator