Handlebar - Sea-doo GTX 4-TEC Operator's Manual

Digitally Encoded Security
System (DESS)
The safety lanyard cap specifically con-
tains an electronic circuit that gives it a
unique electronic serial number. This
is the equivalent of a conventional key.
This safety lanyard cannot be used on
another watercraft and conversely, the
one from another watercraft cannot be
used on your watercraft.
However, the DESS brings a great flex-
ibility. You can buy an additional safe-
ty lanyard and have it programmed for
your watercraft.
To have additional safety lanyard, refer
to an authorized Sea-Doo dealer.
Limited-Speed Operation
Some 4-TEC models are equipped
with special safety lanyard.
The SEA-DOO Learning Key
SEA-DOO Rental Key electronically
limits the speed of the watercraft,
therefore enabling first time users and
less experienced operators to learn
how to operate the watercraft while
gaining the necessary confidence and
control.
Models Equipped with
SEA-DOO Learning Key
With the SEA-DOO Learning Key
the watercraft speed is limited to ap-
proximately 55 km/h (35 MPH).
Models Equipped with
SEA-DOO Rental Key
With the SEA-DOO Rental Key, the
watercraft speed is limited to approxi-
mately 70 km/h (45 MPH).
smo2006-002-002
or the
TM

2) Handlebar

The handlebar controls the direction of
the watercraft. Turning the handlebar
to the right steers the watercraft to the
right and inversely.
Check handlebar and correspond-
ing steering nozzle and side vanes
,
TM
operation before starting. Never
turn handlebar while someone is
nearby rear of watercraft. Keep
away from steering moving parts
(nozzle, side vanes, linkage etc.).
Adjustment (if so equipped)
The handlebar height can be adjusted
to suit rider preferences.
To perform this adjustment, turn the
knob underneath the handlebar.
_____________________
WARNING
37