Sea-doo GTX 4-TEC Operator's Manual page 102

1. Rubber protector
1. Rubber protector
2. Spare fuses
When finished, reinstall the remaining
fuse(s) and reinstall the protector over
fuse(s).
CAUTION: Do not install more than
4 fuses in cover to allow proper in-
stallation of cover.
Main Fuses
They are located beside the MPEM.
See below for details.
_____________________
100
Main Fuse Beside MPEM
TYPICAL
1. MPEM
2. Main fuse
To remove fuse cover, lift tab then pull
holder out. Pull fuse out using cover
on MPEM as shown above.
TYPICAL
Reassemble removed parts.