Wakeboard Rack (If So Equipped) - Sea-doo GTX 4-TEC Operator's Manual

To lift post, unlock by pulling the lock-
ing pin then lift post. Ensure it is prop-
erly locked. Lowering the post is the
opposite operation.
1. Ski/wakeboard post
2. Pull locking device to unlock
1. Ski/wakeboard post lifted
2. Ensure it is locked
WARNING
Make sure ski/wakeboard post is
fully extended and locked before
use. Completely retract and lock
when not used. Use caution with
skier/wakeboarder in tow as tow
rope may backlash to watercraft
when released. Never perform a
sharp turn when towing a skier,
wakeboarder or any toy.
Always have one person other than
the operator as an observer.
______________________
56
NOTE: The handles are supplied for
the observer to have a grip when
watching.
CAUTION: Never use the ski/wake-
board post to tow other crafts.
39) Wakeboard Rack
(if so equipped)
Convenient removable rack(s) to carry
wakeboard(s).
To install:
– Position rack on bumper trim with
its centerline in between the buck-
le receivers located in the footwell
area.
– Position the 2 outer J-hooks of the
rack so as to grab the fiberglass lip
of the hull underneath the bumper
trim.
– Attach the male buckles onto the
buckle receivers located in the
footwell.