Throttle Lever Cables; Engine Oil Change And Oil Filter Replacement; Coolant Replacement - Sea-doo 230 Challenger 2008 Operator's Manual

Table of Contents

Advertisement

Lubrication of the following items
should be performed every 50 hours
in fresh water use but every 10 hours
in salt water use.
Storage Compartments Cover
Mechanism and Hinges
F04L69Y
TYPICAL
Engine Cover and Changing
Room Cylinders
Lubricate rod of cylinders.
Ski Post
If so Equipped
Lubricate ski post through all its
length. Pull out then push in sev-
eral times to distribute the lubricant.
F04L9BY
TYPICAL
Step 1: Lift ski post to lubricate
Step 2: Lubricate here
Step 3: Move post up and down several times
to distribute lubricant
Reverse Gates
Lubricate pivoting points and mecha-
nism on both sides of each gate.
Compartment Cover Cylinders
Lubricate rod of cylinders.

Throttle Lever Cables

Move the throttle lever forward and
rearward once.
smoothly.
Sea-Doo Sport Boat dealer if adjust-
ment is necessary.
Do not alter or tamper with throttle
cables adjustment or routing.
Engine Oil Change and Oil
Filter Replacement
The oil change and filter replacement
should be performed by an authorized
Sea-Doo Sport Boat dealer.

Coolant Replacement

The coolant replacement should be
performed by an authorized Sea-Doo
Sport Boat dealer.
_____________________
3
It must operate
Refer to an authorized
WARNING
1
2
119

Advertisement

Table of Contents
loading

This manual is also suitable for:

230 challenger se 2008230 wake 2008

Table of Contents